POM1 Raspberrypi

This is a Wiki ReactiveMicro page to share the Raspbian Pom1, for all Raspberry pi Distribution. POM1 is an Apple 1 emulator and I have compiled it inside Linux to boot at startup in full HDMI screen. Some Raspberry pi can show a mouse pointer for less than a second on your screen before loading the POM1 emulator (on a Raspberry pi 4b the mouse remain visible, you can move it with your mouse device in a non visible screen area) I advise a 1 A+ Raspberry pi.

To install it, unrar it with winrar or similar program, then connect your preformatted SD card from 16gb or more and with win32DiskImager upload the image inside the SD. When ready connect it to Raspberry pi and after connecting to it Keyboard, HDMI cable and power supply give it current, wait some seconds a @ will appear.

POM 1 Raspberry pi Operating System Download link (Don't bother the google ads that says WHOOPS! there was a problem with preview, click download to download it):

[== Click Here to Download Operating System ==]

[== Click Here to See Video ==]

I and a friend have design and build a case similar to the one that fitted A**le Computer 1 in mid 70's, for Raspberry pi A+ to 4B. here is the link to the page where you can download the files to 3d Print it!

[== Click Here to Download 3d printer files ==]

      Running the Monitor:

WE ARE NOT RESPONSIBLE FOR ANY DAMAGE MADE BY A WRONG INSTALLATION TO YOUR SD CARD AND TO ANY DAMAGE YOU MAKE TO YOUR RASPBERRY PI AND YOUR PERSON USING IT. THE OPERATIVE SYSTEM WAS TESTED ON MORE THAN ONE MODEL OF RASPBERRY PI AND WORKED FINE.

By Toolkitman