User:Xjmaas: Difference between revisions

From The ReActiveMicro Apple II Wiki
Jump to navigation Jump to search
m (Added the Xilinx ISE 14.7 project for the A2 SD/MMC Project)
Line 10: Line 10:
The Apple II is a renewed hobby of mine and I have set my self to the following projects
The Apple II is a renewed hobby of mine and I have set my self to the following projects


=== Apple ][ Slot connector symbol and footprints I designed for ===
=== Apple ][ Slot connector symbol and footprints I designed for Kicad and Eagle===


==== Status ====
==== Status ====
Line 20: Line 20:
: [http://www.xjmaas.nl/wp-content/uploads/2016/04/Apple2_bus.zip kicad]
: [http://www.xjmaas.nl/wp-content/uploads/2016/04/Apple2_bus.zip kicad]
: [http://www.xjmaas.nl/wp-content/uploads/2016/04/con-apple2.lbr_.zip Eagle]
: [http://www.xjmaas.nl/wp-content/uploads/2016/04/con-apple2.lbr_.zip Eagle]


=== Apple ][ Multi Media Card (MMC) Mass Storage card ===
=== Apple ][ Multi Media Card (MMC) Mass Storage card ===

Revision as of 12:37, 2 July 2019

Personalia

An Apple Enthousiast since 1983 when we first obtained a bare Apple II logic board for which we (me and my dad) created a custom case. At the top of my collection I had several Apple ]['s and ///'s, a whole bunch of interface cards, several ProFiles and meters of software. Unfortunately this has been given to others in the past.

Currently I have a few (obtained a few years back) IIgs's, 3 working //c's and a Macintosh Colour Classic.

Right now I am working at a school in The Netherlands as ICT Coordinator.

Projects

The Apple II is a renewed hobby of mine and I have set my self to the following projects

Apple ][ Slot connector symbol and footprints I designed for Kicad and Eagle

Status

active

Description

I created these as I started my first projects with designing some boards for the Apple

File(s)

(These are hosted from my own website)
kicad
Eagle

Apple ][ Multi Media Card (MMC) Mass Storage card


Status

active

Description

Board - Preliminary board design is done and a few bare boards have been ordered. CPLD implementation is incomplete, I still lack some knowledge of VHDL to get some basic signals to work. The CPLD I use, is the Xilinx XC9572XL, as that is a 3.3V CPLD, but with 5V tolerant inputs.
ROM - A basic ROM has been had working with a breadboard like environment.

My goal is to create an expansion card which uses the Multi Media Card SPI interface, based on the SPI65/B by André Fachat
(which in turn is a VHDL reimplementation of Daryl Rictor's 65SPI) as a (raw) mass storage device.

File(s)

File:A2 SD 3.3V.zip
File:A2 SD.zip

Apple Plotter pens replica

Status

On hold

Description

At the moment this project has halted as I am trying to understand how to make "shell-like" models/objects this small using the 3D-printers we have at our school.