MicroDrive/Turbo: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Image:MicroDriveTurbo1.jpg.png|thumb|MicroDrive/Turbo from ReActiveMicro]] | |||
The MicroDrive/Turbo IDE Controller is a Mass Storage Device that can be used with the Apple IIgs or Enhanced IIe. It emulates a Hard Drive using solid-state Compact Flash Cards. | The MicroDrive/Turbo IDE Controller is a Mass Storage Device that can be used with the Apple IIgs or Enhanced IIe. It emulates a Hard Drive using solid-state Compact Flash Cards. | ||
Revision as of 05:37, 30 August 2016
The MicroDrive/Turbo IDE Controller is a Mass Storage Device that can be used with the Apple IIgs or Enhanced IIe. It emulates a Hard Drive using solid-state Compact Flash Cards.
MicroDrive/Turbo is currently sold by ReActiveMicro. They sell it with a preloaded 256 MB Compact Flash Card to enable new users to start using the MicroDrive/Turbo right out of the box. Software included is GS/OS v6.0.1, IIgs Memory Testers, ShrinkIt (8 and 16 bit), Copy II+, MicroDrive Utilities, DiskMaker8, DSK2File, DOS.MASTER and different AE Memory Testers for your IIe. Everything needed to start transferring and unpacking software from the Internet, and start using your Apple II once again.
Project Status: Complete. In production. Actively sold by ReActiveMicro.
Support: Post on the Discussion page (link above) or email ReActiveMicro Support.
History
The MicroDrive/Turbo was designed by Joachim Lange of ///SHH Systeme and released in 1996. This was the first Apple II IDE Controller that used DMA.
In 2004 Gerber Street Enterprises started reselling select items from ///SHH Systeme, however the offering was only a couple items and stock was very limited.
Mid-2006 ReActiveMicro took over reselling all ///SHH Systeme items in an effort to provide better service and a larger product variety to the Apple II Community.
Features
DMA: Looking to speed up your sluggish Apple II? The MicroDrive/Turbo is faster that any other Mass Storage controller since it uses DMA for reads and writes. As the name implies, it performs Direct Memory Access which bypasses the CPU and allows for a whopping 40% faster read and write speeds when compared to conventional controllers. For example, with an accelerator installed in your IIgs you can boot GS/OS in as fast as 7 seconds! The DMA option can be disabled using the Setup utility.
40 Pin IDE Interface: The 40 Pin IDE interface on the MicroDrive/Turbo IDE is a standard 16bit IDE port. It is capable of addressing Master and Slave IDs on the IDE chain.
IDE to Dual CF Adapter: The MicroDrive/Turbo comes standard with a 40 Pin IDE to Dual CF Adapter. The user can control which of the two CF Slots is Master or Slave using a Jumper on the Adapter. The Adapter however can be removed if so desired and a standard IDE Cable and devices attached.
Compact Flash: Why use Compact Flash Cards? They are readily available, inexpensive, low power, noiseless, shock proof, removable, and last almost forever - things that can't be said about mechanical Hard Drives. However, it is still possible to use some older IDE Hard Drives with the MicroDrive/Turbo Controller if desired. Do you download software from the Internet and wonder how to get it to your Apple II or spend lots of time doing so? With the MicroDrive/Turbo IDE Controller it's now super easy! Just remove the Compact Flash Card from your MicroDrive/Turbo, insert it in to your PC and using CiderPress (Windows only) you can read and write directly to the Compact Flash Card. Using your PC for transferring files and backing up has never been so quick and painless!
ProDOS 8 and 16: The MicroDrive/Turbo IDE Controller is ProDOS compatible. It's recognized as a 'standard' Mass Storage Device just like any Hard Disk Drive on your Apple II. Large Volume DOS 3.3 support is provided through the use of a program called DOS.MASTER (preloaded on CF Card).
Boot Options: By default, Volume 1 is set to boot. However when setting up a new CF Card the user sets which Volume they desire to boot. Or on an existing CF Card the Setup utility can modify which is the default boot Volume. However the MicroDrive/Turbo also offers a temporary option to boot to ANY volume. When powering on the Apple II the user will press and hold the Open Apple key. This will pause the MicroDrive/Turbo's splash screen. The user then presses the corresponding Volume's number key, and the MicroDrive/Turbo will boot to that Volume.
Documentation, Files, and Software
Any questions? Please ask! See our Wiki for software, images, manuals, and support.