IIgs ROM1 Adapter: Difference between revisions

From The ReActiveMicro Apple II Wiki
Jump to navigation Jump to search
(Created page with "The IIgs ROM1 Adapter converts a ROM0 IIgs to a ROM1 by replacing the ROM on the motherboard. It allows an older Apple IIgs system to run newer software like GS/OS. The Adap...")
 
No edit summary
Line 1: Line 1:
[[Image:2018-09-03-IIgs_ROM1_Adapter-Face-Wiki.png|thumb|Apple IIgs ROM1 Adapter<br>Current version from ReActiveMicro]]
The IIgs ROM1 Adapter converts a ROM0 IIgs to a ROM1 by replacing the ROM on the motherboard.  It allows an older Apple IIgs system to run newer software like GS/OS.
The IIgs ROM1 Adapter converts a ROM0 IIgs to a ROM1 by replacing the ROM on the motherboard.  It allows an older Apple IIgs system to run newer software like GS/OS.



Revision as of 05:29, 13 September 2018

Apple IIgs ROM1 Adapter
Current version from ReActiveMicro

The IIgs ROM1 Adapter converts a ROM0 IIgs to a ROM1 by replacing the ROM on the motherboard. It allows an older Apple IIgs system to run newer software like GS/OS.

The Adapter project was conceived of and created by Henry from [ReActiveMicro].


Project Status: Complete. In production. Actively sold by ReActiveMicro.

Support: Post on the Discussion page (link above) or email ReActiveMicro Support.

Sales: Visit the ReActiveMicro Store.


History

Back in 2005 when Henry from ReActiveMicro first returned to the Apple II he found several IIgs systems obtained were ROM0 and couldn't run GS/OS v6.0.1. He also found that some ROM0 IIgs users wanted to upgrade their systems to ROM1. However there isn’t a simple way to do so since Apple used a nonstandard ROM. Henry then found a way to use two Machine Pin Sockets to allow a 27C1001 EPROM to work in place of Apple’s 531000 OTP ROM IC.