IBM 15pin to Apple 9pin Joystick Adapter by Manila Gear: Difference between revisions

From The ReActiveMicro Apple II Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
(One intermediate revision by the same user not shown)
Line 23: Line 23:
v1.0 of the adapter had some sizing issues.  The DB9 connector was found to be a little too far away from the PCB edge, and when installed in an enclosure it would not mate correctly to the Apple II.  So v1.1 was produced which resolved the issue.
v1.0 of the adapter had some sizing issues.  The DB9 connector was found to be a little too far away from the PCB edge, and when installed in an enclosure it would not mate correctly to the Apple II.  So v1.1 was produced which resolved the issue.


On September 15th, 2017 the project was added to the ReActiveMicro Store and release for sale.
On September 15th, 2017 the v1.1 project was added to the ReActiveMicro Store and release for sale.


On September 15th, 2018 the v1.2 project was added to the ReActiveMicro Store and release for sale.  v1.2 had only minor changes to the PCB layout which allows for lower cost assembly and simpler 3D printed enclosures.  The operation and appearance is identical with v1.1.


== Versions of the IBM 15pin to Apple 9pin Joystick Adapter by Manila Gear ==
== Versions of the IBM 15pin to Apple 9pin Joystick Adapter by Manila Gear ==

Revision as of 04:11, 16 September 2018

Joystick Adapter v1.1 by Manila Gear

The IBM 15pin to Apple 9pin Joystick Adapter was created by Manila Gear in May 2017. It allows the use of an "IBM" Joystick (DB15) on the Apple II computer (DB9).

The adapter and enclosure was designed with multi system use in mind, and provides enough clearance for all adjacent cables that are found on the different Apple II systems.


Project Status: Complete. In production. Actively sold by Manila Gear and ReActiveMicro.

Support: Post on the Discussion page (link above) or email ReActiveMicro Support.

Sales: Visit the ReActiveMicro Store.





History

In May of 2017 the IBM 15pin to Apple 9pin Joystick Adapter project was discussed by John Valdezco of Manila Gear and Henry of ReActiveMicro. Tom Arnold of philosophyofsound.com was no longer able to supply his Joystick Adapter, so John started work on the CAD layout and enclosure design to help fill market demand. The original schematic was created by Jeff Hurlburt. John used it as a guide to create the adapter.

v1.0 of the adapter had some sizing issues. The DB9 connector was found to be a little too far away from the PCB edge, and when installed in an enclosure it would not mate correctly to the Apple II. So v1.1 was produced which resolved the issue.

On September 15th, 2017 the v1.1 project was added to the ReActiveMicro Store and release for sale.

On September 15th, 2018 the v1.2 project was added to the ReActiveMicro Store and release for sale. v1.2 had only minor changes to the PCB layout which allows for lower cost assembly and simpler 3D printed enclosures. The operation and appearance is identical with v1.1.

Versions of the IBM 15pin to Apple 9pin Joystick Adapter by Manila Gear