Difference between revisions of "AppleWin Serial to USB Communication port"

From The ReActiveMicro Apple II Wiki
Jump to navigation Jump to search
Line 8: Line 8:
 
disk on AppleWin and made it start.
 
disk on AppleWin and made it start.
 
How you can see from this video:
 
How you can see from this video:
<div style="font-size:150%; text-align: center;">[[https://www.youtube.com/watch?v=KkNpGVQGfeg|  Click Here to Download PROTERM APPLE II program ]]</div>  
+
<div style="font-size:150%; text-align: center;">[[https://www.youtube.com/watch?v=KkNpGVQGfeg|  Click Here to watch video] a]</div>  
 
the leds on Arduino blinks in yellow for receive and transfer date. I hope this little experiment can be useful in future for other
 
the leds on Arduino blinks in yellow for receive and transfer date. I hope this little experiment can be useful in future for other
 
products like, who knows make communicate directly the emulator with a Floppy disk drive for the Apple ii, a modem etc.
 
products like, who knows make communicate directly the emulator with a Floppy disk drive for the Apple ii, a modem etc.

Revision as of 04:32, 12 July 2020

This is a small entry just to show you i have found a method to make communicate Applewin Via USB to a serial Arduino Uno Genuino Serial port. To build it i have used the program in the file i have attached here:

and upload it to arduino rom via Arduino ide. Then i have connected the Arduino's usb ports to computer and Arduino and started AppleWin emulator After selecting Apple //e config and COM6 in my case, you can check your Arduino COM port under the Arduino ide menu. After this i have loaded this PROTERM .dsk

disk on AppleWin and made it start. How you can see from this video:

the leds on Arduino blinks in yellow for receive and transfer date. I hope this little experiment can be useful in future for other products like, who knows make communicate directly the emulator with a Floppy disk drive for the Apple ii, a modem etc.




By Toolkitman