Difference between revisions of "Accelerator Speeds"
|Line 8:||Line 8:|
On July 4th, 2017 Plamen Vaysilov (Пламен Вайсилов)
On July 4th, 2017 Plamen Vaysilov (Пламен Вайсилов) modified SpeedTest for the IIe to use a [[No Slot Clock]] to more carefully time tests.
|Line 19:||Line 19:|
SpeedTest Notes: All times are in SECONDS. TIME column is the time in seconds the test took on YOUR system. RELATIVE column is how many
SpeedTest Notes: All times are in SECONDS. TIME column is the time in seconds the test took on YOUR system. RELATIVE column is how many faster your test results were compared to a stock IIe. Higher scored INDEX tests are better. Lower scored READ/WRITE tests are better.
Revision as of 04:59, 9 July 2017
To better track IIe Accelerator testing this page has been created. Please update the table below with your findings.
As with any page on this Wiki, use the Discussion page (link above) to discuss your findings or related topics.
There are many accelerators for the Apple II over the years. Their speeds and processing ability have all been highly debated. This page was created to help document their test results, and is updateable by the Community.
On July 4th, 2017 Plamen Vaysilov (Пламен Вайсилов) modified SpeedTest for the IIe to use a No Slot Clock to more carefully time tests.
Downloads / Software
As other software is written it will be posted here and the comparison charts updated / added.
SpeedTest Notes: All times are in SECONDS. TIME column is the time in seconds the test took on YOUR system. RELATIVE column is how many times faster your test results were compared to a stock IIe. Higher scored INDEX tests are better. Lower scored READ/WRITE tests are better.
NOTE: To correctly test the UltraWarp you must do the following steps BEFORE testing.
- Boot SpeedTest disk and load the SpeedTest program.
- From the SpeedTest menu exit to BASIC.
- Type CALL-151 and press Enter.
- Type C081 and press Enter.
- Type C081 again and press Enter. (both times are required)
- Type D000<D000.FFFFM and press Enter.
- Type C083 and press Enter.
- Type 9DBFG and press Enter to get back to BASIC.
- Type RUN to restart the SpeedTest program.
If you are testing an UltraWarp and do not perform these steps the program may not work correctly.
|Accelerator Speed Results Using "SpeedTest" for the II/+/e/c.|
|All Times In Seconds||//e
|ABOVE Scores: Larger=Better / BELOW Scores: Smaller=Better|
|CPU Instruction Mix||114||33||35||21||7||35||35||37||16.28||30||5.7|
|Direct Text Writes||115||36||67||24||43||38||37||67||1.825||34||4.423|
|Direct Text Writes #2||118||37||68||24||43||38||38||69||1.815||35||4.538|
|BIOS Text Write||117||224||208||51||161||247||246||211||.4854||232||.5792|
|Direct LoRes Writes||118||32||51||21||25||36||36||54||3.277||30||5.9|
|High-Res Memory Writes||114.5||32||42||19||21||36||35||47||5.452||29||6.361|