Apple II 3.5 Disk Controller Card: Difference between revisions
No edit summary |
Khaibitgfx (talk | contribs) mNo edit summary |
||
| (54 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
[[Image: | [[Image:Title_A2_Disk_Controller.svg|440px|link=https://wiki.reactivemicro.com/images/0/03/Title_A2_Disk_Controller.svg]] | ||
[[Image:2018-07-09-_ReActiveMicro_-_3.5_Disk_Controller_v1.0-Face-Wiki.png|thumb|Apple II 3.5" Disk Controller Card<br>Current version from Ultimate-Micro]] | |||
The Apple II 3.5" Disk Controller Card, also known as the SuperDrive Card, is a 3.5" drive controller card for the Apple II, II''plus'', //e and IIGS designed originally by Apple Computers. The card allows a simple way to connect a 3.5" Disk Drives to the Apple II computers. All Apple drives are supported, as well as AE and some other clone drives. A total of two drives can be added by using the card. | |||
This project marked the first collaboration between [[ReActiveMicro]] and UltimateApple2. | |||
<strong>Product Status:</strong> Activity Sold by ReActiveMicro. | |||
<strong>Support:</strong> Post on the [[{{TALKPAGENAME}}|Discussion]] page (link above) or email [https://www.reactivemicro.com/contact-us/ ReActiveMicro Support]. | |||
<strong>Sales:</strong> Visit the [https://www.reactivemicro.com/shop/ ReActiveMicro Store]. | |||
== History == | == History == | ||
In 2006 | In 2006 ReActiveMicro was successful in cracking and testing the PLDs on the Apple II 3.5 Disk Controller Card. This is the first step in producing a newly manufactured duplicate card. | ||
In 2007 | In 2007 UltimateApple2 and ReActiveMicro discussed the Apple II 3.5" Disk Controller Card project and they decided to move ahead with Proof of Concept boards. Henry depopulated his Apple II 3.5 Disk Controller Card and sent it to be scanned. In 2008 Proof of Concept PCBs were ordered. In 2009 hand assembled boards where sold them at KFEST. | ||
The first run of boards were 1-to-1 clones with only the Silkscreen layer updated by Henry. In the rush they were mislabeled "A2DiskCrontoller v1.0". These Proof of Concept PCBs however proved the CAD files and Bill of Materials were good, and other runs of boards could be produced from these files. | The first run of boards were 1-to-1 clones with only the Silkscreen layer updated by Henry. In the rush they were mislabeled "A2DiskCrontoller v1.0". These Proof of Concept PCBs however proved the CAD files and Bill of Materials were good, and other runs of boards could be produced from these files. | ||
<gallery class="center" widths=500px heights=250px> | <gallery class="center" widths=500px heights=250px> | ||
File:A2DiskController_v1.0_-_Face-Wik.png|A2DiskCrontoller v1.0 | File:A2DiskController_v1.0_-_Face-Wik.png|A2DiskCrontoller v1.0 | ||
</gallery> | </gallery> | ||
On 2016-02-10 Henry re-edited the layout, slightly updated the Silkscreen layer, and incremented to v1.1. Ten more Proof of Concept PCBs were ordered to reprove the design changed and sell. Up to this point all | On 2016-02-10 Henry re-edited the layout, slightly updated the Silkscreen layer, and incremented to v1.1. Ten more Proof of Concept PCBs were ordered to reprove the design changed and sell. Up to this point all boards produced were hand assembled. | ||
<gallery class="center" widths=300px heights=200px> | <gallery class="center" widths=300px heights=200px> | ||
File:2018-07-09_-_A2Disk_v1.1-Wiki.png|A2DiskController v1.1 - Face | File:2018-07-09_-_A2Disk_v1.1-Wiki.png|A2DiskController v1.1 - Face | ||
| Line 31: | Line 36: | ||
</gallery> | </gallery> | ||
On 2016-03-25 Henry continued to edit the v1.1 design to support a smaller Resistor Network, utilizing the newer WDC C02 CPU, 27 and 28C/F series EPROM, fuses on the power lines, and SOJ SRAM. He also tented all | |||
On 2016-03-25 Henry continued to edit the v1.1 design to support a smaller Resistor Network, utilizing the newer WDC C02 CPU, 27 and 28C/F series EPROM, fuses on the power lines, and SOJ SRAM. He also tented all vias and added a Silkscreen layer to make assembly much simpler. The design was incremented to v1.2, however it was plagued with issues due to many changes at once combined with CAD issues. Ultimately the design was abandoned and the project was rolled back to the known good starting point of v1.1. | |||
<gallery class="center" widths=500px heights=250px> | <gallery class="center" widths=500px heights=250px> | ||
File:2016-03-25_-_Ultimate-Micro_-_A2DiskController_-_Face_-_v1.2-Wiki.png|A2DiskController v1.2 - Face | File:2016-03-25_-_Ultimate-Micro_-_A2DiskController_-_Face_-_v1.2-Wiki.png|A2DiskController v1.2 - Face | ||
</gallery> | </gallery> | ||
On 2018-05-09 the project was revisited due to demand and others who had failed attempts in making a 3.5" Drive Controller of their own. Henry re-edited the project hard by changing the footprint for the Resistor Pack to something more commonly available in today's market. He also edited the CPU footprint to allow for use of the newer WDC 65C02 CPU. All PLCC parts were socketed so the boards could be factory assembled, which marks the new direction ReActiveMicro has taken since its full return back to the retro | On 2018-05-09 the project was revisited due to demand and others who had failed attempts in making a 3.5" Drive Controller of their own. Henry re-edited the project hard by changing the footprint for the Resistor Pack to something more commonly available in today's market. He also edited the CPU footprint to allow for use of the newer WDC 65C02 CPU. All PLCC parts were socketed so the boards could be factory assembled, which marks the new direction ReActiveMicro has taken since its full return back to the retro scene in mid-July 2016. The original Silkscreen layer was added back to the board and cleaned up to make it more readable. The name was also changed from "A2DiskController" back to the original "Apple II 3.5" Disk Controller Card". Henry also added "AKA - SuperDrive Card" to the name since some people in the retro community know the board by this slang name. | ||
<gallery class="center" widths=300px heights=200px> | <gallery class="center" widths=300px heights=200px> | ||
File:2018-07-09-_ReActiveMicro_-_3.5_Disk_Controller_v1.0-Face-Wiki.png|Apple II 3.5" Disk Controller Card v1.0 - Face | File:2018-07-09-_ReActiveMicro_-_3.5_Disk_Controller_v1.0-Face-Wiki.png|Apple II 3.5" Disk Controller Card v1.0 - Face | ||
File:2018-07-09-_ReActiveMicro_-_3.5_Disk_Controller_v1.0-Rear-Wiki.png|Apple II 3.5" Disk Controller Card v1.0 - Rear | File:2018-07-09-_ReActiveMicro_-_3.5_Disk_Controller_v1.0-Rear-Wiki.png|Apple II 3.5" Disk Controller Card v1.0 - Rear | ||
</gallery> | </gallery> | ||
== Review == | |||
{{#ev:youtube|BqqxliWeAQY|400|right|Joe's Computer Museum: Apple II SuperDrive Card Review|frame}} | |||
On September 25, 2018 Joe Strosnider posted a review about the Apple II 3.5" Disk Controller Card v1.0.<br> | |||
<br> | |||
<br> | |||
<br> | |||
<br> | |||
<br> | |||
<br> | |||
<br> | |||
== Documentation == | |||
<div class="new_window"> | |||
<gallery class="center" widths=150px heights=80 caption="Original documentation by Apple Computer Inc."> | |||
File:PDF_ICON.svg|Users Manual |link=https://wiki.reactivemicro.com/images/9/90/Apple_II_3.5_Disk_Controller_Guide.pdf</gallery> | |||
</div> | |||
[[Category:Hardware]] | |||
[[Category:Apple]] | |||
[[Category:ReActiveMicro Projects]] | |||
Latest revision as of 05:52, 18 October 2020
Current version from Ultimate-Micro
The Apple II 3.5" Disk Controller Card, also known as the SuperDrive Card, is a 3.5" drive controller card for the Apple II, IIplus, //e and IIGS designed originally by Apple Computers. The card allows a simple way to connect a 3.5" Disk Drives to the Apple II computers. All Apple drives are supported, as well as AE and some other clone drives. A total of two drives can be added by using the card.
This project marked the first collaboration between ReActiveMicro and UltimateApple2.
Product Status: Activity Sold by ReActiveMicro.
Support: Post on the Discussion page (link above) or email ReActiveMicro Support.
Sales: Visit the ReActiveMicro Store.
History
In 2006 ReActiveMicro was successful in cracking and testing the PLDs on the Apple II 3.5 Disk Controller Card. This is the first step in producing a newly manufactured duplicate card.
In 2007 UltimateApple2 and ReActiveMicro discussed the Apple II 3.5" Disk Controller Card project and they decided to move ahead with Proof of Concept boards. Henry depopulated his Apple II 3.5 Disk Controller Card and sent it to be scanned. In 2008 Proof of Concept PCBs were ordered. In 2009 hand assembled boards where sold them at KFEST.
The first run of boards were 1-to-1 clones with only the Silkscreen layer updated by Henry. In the rush they were mislabeled "A2DiskCrontoller v1.0". These Proof of Concept PCBs however proved the CAD files and Bill of Materials were good, and other runs of boards could be produced from these files.
-
A2DiskCrontoller v1.0
On 2016-02-10 Henry re-edited the layout, slightly updated the Silkscreen layer, and incremented to v1.1. Ten more Proof of Concept PCBs were ordered to reprove the design changed and sell. Up to this point all boards produced were hand assembled.
-
A2DiskController v1.1 - Face
-
A2DiskController v1.1 - Rear
On 2016-03-25 Henry continued to edit the v1.1 design to support a smaller Resistor Network, utilizing the newer WDC C02 CPU, 27 and 28C/F series EPROM, fuses on the power lines, and SOJ SRAM. He also tented all vias and added a Silkscreen layer to make assembly much simpler. The design was incremented to v1.2, however it was plagued with issues due to many changes at once combined with CAD issues. Ultimately the design was abandoned and the project was rolled back to the known good starting point of v1.1.
-
A2DiskController v1.2 - Face
On 2018-05-09 the project was revisited due to demand and others who had failed attempts in making a 3.5" Drive Controller of their own. Henry re-edited the project hard by changing the footprint for the Resistor Pack to something more commonly available in today's market. He also edited the CPU footprint to allow for use of the newer WDC 65C02 CPU. All PLCC parts were socketed so the boards could be factory assembled, which marks the new direction ReActiveMicro has taken since its full return back to the retro scene in mid-July 2016. The original Silkscreen layer was added back to the board and cleaned up to make it more readable. The name was also changed from "A2DiskController" back to the original "Apple II 3.5" Disk Controller Card". Henry also added "AKA - SuperDrive Card" to the name since some people in the retro community know the board by this slang name.
-
Apple II 3.5" Disk Controller Card v1.0 - Face
-
Apple II 3.5" Disk Controller Card v1.0 - Rear
Review
On September 25, 2018 Joe Strosnider posted a review about the Apple II 3.5" Disk Controller Card v1.0.
Documentation
- Original documentation by Apple Computer Inc.
-
Users Manual
