A2FPGA
The A2FPGA is primarily an HD video and Mockingboard-compatible sound card for the Apple II, II+, //e, and IIgs. It's a small, Apple II peripheral card that can be installed in any Apple II computer II, II+, //e, IIgs. See Slots below for compatible slot locations by system type. The A2FPGA uses a modern FPGA (field-programmable gate array or "programmable logic") to provide precise timing-accurate interfacing to the Apple II bus. This allows the card to capture all access to Apple II display memory in order to faithfully generate Apple text and graphics in crisp 480p 60Hz HD as well as providing the functionality of a number of popular peripheral cards in a single Apple II slot. The A2FPGA has been tested with Apple II, II+, //e, and IIgs models and brings the classic Apple II experience to a whole new level on any monitor or television.
Product Status: Actively sold by ReActiveMicro.
Support: Post on the Discussion page (link above) or email ReActiveMicro Support.
Sales: Visit the ReActiveMicro Store.
Open Source: Visit the A2FPGA Core on GitHub.
Features
As of April 2024 the standard features currently are:
720x480 @ 60Hz HDMI output supporting all Apple II, II+, //e, & IIgs display modes.* Mockingboard sound compatibility (Slot 4) Both Apple II system speaker audio AND Mockingboard audio are output to your HDMI display's speakers Synetix SuperSprite and Ciarcia EZ-Color TMS9918a compatibility (Slot 7)
- If your monitor doesn't support 720x480 resolution, or some older "CCTV" type monitors, then you may not receive video. More common and newer HDMI monitors should not have any issues.
- All functionality is supported simultaneously. Users don’t have to change modes or configuration to switch between features.
- The A2N20-V2 Multicard does NOT connect the INT_IN/INT_OUT or DMA_IN/DMA_OUT daisy chain lines. Systems that have multiple cards which depend on daisy chaining may not function.
Slots:
II/Plus/e - Any Slot, We recommend Slot 7 for better HDMI cable routing
IIgs ROM0 - NOT TESTED, But Slot 3 ONLY
IIgs ROM1 - Slot 3 ONLY*
IIgs ROM3 - Any Slot 1-6 but WILL NOT function in Slot 7
*A user can use the A2FPGA in any slot in the ROM1 IIgs if they install a jumper wire mod from Slot 3, pin 35, to whichever slot they want to use the card, pin 35.
WARNING! This board MUST be installed with the HDMI connector facing the forward keyboard end of the chassis! Failure to do so will result in damage to your Apple II as all bus lines are active.
NOTE:
- The A2FPGA is fully DMA compliant and cards such as the MicroDrive/Turbo do work with DMA mode enabled.
- If Mockingboard is enabled, NO other card may be physically present in Slot 4. For IIgs, you must set the control panel slot 4 to "My Card"
- The FPGA used on A2FPGA takes ~2 seconds to power on and sync to an HDMI display. During this time the Apple II system is held in RESET, meaning the II will do nothing (not even beep) until the A2FPGA board has been fully setup and synched. The initial Apple II power on "beep" will be missed, but all subsequent Apple II sound can be output to HDMI if SW2 is ON.
- The A2FPGA is NOT an emulator. It is a full and complete implementation of all of the original logic for these hardware components plus bus decoding, memory shadowing, and the full range of video modes for the entire Apple II family. Plus a complete implementation of the TMS-9918A VDP and the SuperSprite and Ciarcia compatible means to hook into it.
- TMS-9918A VDP: A complete implementation of the original V1 F18A Core (created by Matt Haggerty). 16K RAM is allocated to the VDP. That is implemented 100% in the FPGA.
Incompatibilities & Issues
- Undead by 8-Bit-Shack- please update to the latest firmware that fixes the double-lores mode that the game uses. It should work fine with the latest firmware.
- Any peripheral cards installed in Slots 4 or 7 might not work correctly, and other slots should be used. Slot 4 is where the Mockingboard is accessed, and Slot 7 is where the Synetix SuperSprite card is accessed. These options can be disabled with reprogramming the firmware. See Firmware / FPGA Core below for firmware options.
- IIgs Ensoniq Sound does NOT get output to the HDMI audio - yet. This is currently in the works and there will be a firmware update available listed below.
- Users have encountered issues when routing the output of the A2N20-V2 MultiCard through various video capture devices due to differing supported video modes. The recommended workaround is to use an HDMI audio embedder/extractor device, which forces the output packets to be re-encoded correctly for video capture devices. A successfully tested example is the SIIG device available on Amazon. Another option is to use an HDMI output splitter. We have tested this model available at Amazon [1] and it works well. Other less expensive options have not performed as well. The team is working on a potential firmware update or other possible solution to improve compatibility with video capture cards in the future and this page will be updated as new information becomes available.
- BuGS and GS.Pacman might show some sprite issues when playing with elements disappearing. The IIgs has the ability to do set scan line interrupts that trigger when a video line is being output. This allows the software developer to time their writes to the screen after the raster is sent to the monitor. What this means is that game software can erase and redraw the graphics elements without flickering. Very few original IIgs games used this technique but it is more common with modern IIgs games. A fix is currently being researched for the few titles that are affected. A list will be maintained here for easy reference.
*BuGS *GS.Pacman
KansasFest 2024
On July 27th, 2024, the A2FPGA team presented at KansasFest 2024 and the video of the presentation is here:
Reviews
On June 08th, 2024 Lon.TV posted a review video of the A2FPGA in a IIe environment. A IIgs review is planned in the future.
On May 6th, 2024 Chris Torrence of Assembly Lines posted a review video of the A2FPGA in a IIgs environment. Also shows things like setting up the Control Panel in the IIgs.
On April 27nd, 2024 Chris Torrence of Assembly Lines posted a review video of the A2FPGA in a II Plus and IIe environment. Chris also reviews and does a firmware update in real time. Skip to 9:56 to see it and follow along!
On April 22nd, 2024 Joe Strosnider of Joe's Computer Museum posted a review video of the A2FPGA in a IIgs environment. Joe also reviews and does a firmware update in real time. Skip to 15:03 to see it and follow along!
DIP Switch Settings
The A2N20v2 has a 4-switch DIP switch that controls the following settings:
SW1: Enable Scanline effect when set to ON (default). SW2: Enable Apple II speaker sounds via HDMI when set to ON (default). SW3: Set to ON (default) for Power-on-Reset Hold - Delay Apple II start-up until FPGA is initialized and running. SW4: Apple IIgs - Set to ON when installed in an Apple IIgs. OFF for II, II+ and II/e systems.
The Mockingboard functionality is directly tied to Slot #4. At present there is no way to override this behavior. In order for the Mockingboard implementation to work properly, no other card may be physically present in Slot 4 on any Apple II system. Further, if you have a IIgs, you must configure slot 4 as "My Card" in the Apple IIgs control panel.
The Synetix SuperSprite functionality is also directly tied to Slot #7. If you intend to use a card in slot #7, you will not be able to access the SuperSprite (TMS-9918A / F18A VDP functions). Additionally, making slot #7 usable for your own card requires that you perform a firmware update using the "NOSPRITE7" version of the firmware located below.
Firmware / FPGA Core
The A2FPGA firmware is easily updated on any PC or Mac and is based on open-source code so that new functionality and bug fixes from the developer community can be added over time.
You can learn more about this exciting project on its public GitHub repository: https://github.com/a2fpga/a2fpga_core.
The team also maintains a presence on X (formerly Twitter) here: https://twitter.com/a2fpga.
UPDATING THE A2N20-V2 FPGA FIRMWARE
https://github.com/a2fpga/a2fpga_core/releases/tag/12-14-2024: The latest (12-14-2024) firmware builds for the a2n20v2 Multicard. Please note that all firmware is now available via the Releases area at the GitHub repository link. The release includes a README.pdf file containing important, step-by-step instructions for updating your a2n20v2 Multicard. Users should read this document completely prior to attempting to update their firmware as there are now more options available and the process has slightly changed. Five (5) variant builds are now included in this release and there is now a new series of options that include the Apple Super Serial Card functionality on Slot 2:
a2n20v2-10-12-2024-DEFAULT.fs ---> HD Video, SSC Slot 2, Mockingboard Slot 4, SuperSprite Slot 7
a2n20v2-10-12-2024-MB4.fs ---> HD Video, Mockingboard Slot 4 - No Other Features
a2n20v2-10-12-2024-SSC2-MB4.fs ---> HD Video, SSC Slot 2, Mockingboard Slot 4 - No Other Features
a2n20v2-10-12-2024-SSC2.fs ---> HD Video, SSC Slot 2 - No Other Features
a2n20v2-10-12-2024-VIDEO-ONLY.fs ---> HD Video Only, No Other Features
The main project repository with all open source code for the project is here: https://github.com/a2fpga/a2fpga_core
RELEASE NOTES:
1. This release fully updates the Mockingboard implementation for 100% compatibility with mbaudit 1.52-1.55 (https://github.com/tomcw/mb-audit). A2FPGA now successfully passes ALL mbaudit tests.
2. The Mockingboard implementation no longer incorrectly identifies the presence of a speech chip. Total Replay now properly identifies the correct configuration of the Mockingboard at startup.
All prior versions of the firmware for this product are listed below and organized by date:
https://github.com/a2fpga/a2fpga_core/releases/tag/10-12-2024: The latest (10-12-2024) firmware builds for the an220v2 Multicard. Please note that all firmware is now available via the Releases area at the GitHub repository link. The release includes a README.pdf file containing important, step-by-step instructions for updating your a2n20v2 Multicard. Users should read this document completely prior to attempting to update their firmware as there are now more options available and the process has slightly changed. Five (5) variant builds are now included in this release and there is now a new series of options that include the Apple Super Serial Card functionality on Slot 2:
a2n20v2-10-12-2024-DEFAULT.fs ---> HD Video, SSC Slot 2, Mockingboard Slot 4, SuperSprite Slot 7
a2n20v2-10-12-2024-MB4.fs ---> HD Video, Mockingboard Slot 4 - No Other Features
a2n20v2-10-12-2024-SSC2-MB4.fs ---> HD Video, SSC Slot 2, Mockingboard Slot 4 - No Other Features
a2n20v2-10-12-2024-SSC2.fs ---> HD Video, SSC Slot 2 - No Other Features
a2n20v2-10-12-2024-VIDEO-ONLY.fs ---> HD Video Only, No Other Features
https://wiki.reactivemicro.com/images/e/e9/A2fpga-08-17-2024-FIRMWARE.zip: The a2n20v2 Multicard Firmware Version 08-17-2024 (LATEST STABLE RELEASE, DEFAULT, NOSPRITE7, and VIDEO-ONLY BUILDS). NOTE: This ZIP file contains the latest DEFAULT, NOSPRITE7, and VIDEO-ONLY builds of the firmware. DEFAULT enables Mockingboard in Slot #4 and Synetix SuperSprite in Slot #7. NO OTHER BOARDS MAY BE PRESENT IN THESE SLOTS USING THE DEFAULT FIRMWARE. If you require the use of Slot #7, and do not plan to work with the Synetix SuperSprite functionality, we recommend that you install the NOSPRITE7 build of the firmware contained in this Zip file as it has been tested to properly function with the Reactive Microdrive Turbo in slot 7. If you only wish to use A2FPGA for high-quality video output of all Apple II video modes, we recommend the VIDEO-ONLY build. The README.pdf file contained in the ZIP file includes detailed instructions, release notes, and more information to help you choose the correct build for your configuration and flash it into your a2n20-v2 Multicard - please read it completely before attempting to flash your firmware.
https://wiki.reactivemicro.com/images/5/59/A2n20v2-04252024-ALL.zip: The a2n20v2 Multicard Firmware Version 04-25-2024 (PRIOR STABLE RELEASE, DEFAULT and NOSPRITE7 BUILDS).NOTE: This ZIP file contains BOTH the DEFAULT and NOSPRITE7 builds of the firmware. DEFAULT enables Mockingboard in Slot #4 and Synetix SuperSprite in Slot #7. NO OTHER BOARDS MAY BE PRESENT IN THESE SLOTS USING THE DEFAULT FIRMWARE. If you require the use of Slot #7, and do not plan to work with the Synetix SuperSprite functionality, we recommend that you install the NOSPRITE7 build of the firmware contained in this Zip file as it has been tested to properly function with the Reactive Microdrive Turbo in slot 7. The README.pdf file contained in the ZIP file includes detailed instructions and more information to help you choose the correct build for your configuration and flash it into your a2n20-v2 Multicard - please read it completely before attempting to flash your firmware.
Known Compatibility Issues
Apple //e Users who install ROMXce -AND- A2Heaven FastChip //e Accelerators have reported issues when used in combination with A2FPGA. At this time, this combination is UNSUPPORTED. Please note that no issues have been reported with Transwarp-based accelerators, this issue only manifests with the FastChip //e. Also note that ROMX, ROMXce, and ROMX+ all appear to operate correctly with the A2FPGA. This conflict is NOT an issue with the ROMXce or ROMX+, rather it is an issue with the operation of the A2Heaven FastChip //e.
The GBBS bulletin board system employs a highly customized super serial card device driver and it has been confirmed that GBBS may only function properly with the VIDEO-ONLY version of the firmware in some configurations. At this time, we recommend that if users plan to operate a BBS with GBBS, the simplest solution is to use the VIDEO-ONLY version of the firmware on the A2FPGA. This will eliminate all potential conflicts with any other cards in the system while enabling high-quality HD video output for the Apple II on a modern display.
Testing
The A2FPGA displays video immediately when installed in the correct slot. Sound depends on the DIP Switch setting.
Any diagnostic program can be used to test varying video modes. Other programs, such as games, could also be used. Sound testing can more simply be performed using the Mockingboard Demo disk.
For testing Synetix SuperSprite features, this link https://mirrors.apple2.org.za/ftp.apple.asimov.net/images/hardware/video/StarSprite-SuperSprite-Programs.zip is a ZIP file with images for the Synetix SuperSprite programs. When you unpack it, the Demonstration Disk is probably the best one to use for testing.
History
September 7th, 2023 A2FPGA contacted Henry to discuss their HDMI related project and about ReActiveMicro assisting with distribution and related sales, logistics, and support.