The ReActiveMicro Apple II Wiki - Recent changes [en]

Main Page

RMHenry — Sat, 17 Oct 2026 05:02:11 GMT

← Older revision		Revision as of 22:02, 16 October 2026
Line 33:		Line 33:
	</div>		</div>
	<gallery class="center" widths=300px>		<gallery class="center" widths=300px>
			File:2026-CFFA1-Original-tiny.png\|CFFA1 Mass Storage Controller for the Apple1\|link=CFFA1
	File:Photoroom_20240316_143943.jpg\|A2FPGA Multicard\|link=A2FPGA		File:Photoroom_20240316_143943.jpg\|A2FPGA Multicard\|link=A2FPGA
	File:IMG_20201227_152312585_HDR-Wiki-tiny.png\|Universal Enclosure PSU Kit\|link=Universal_Enclosure_PSU		File:IMG_20201227_152312585_HDR-Wiki-tiny.png\|Universal Enclosure PSU Kit\|link=Universal_Enclosure_PSU

CFFA1

RMHenry — Sat, 17 Oct 2026 04:58:00 GMT

← Older revision		Revision as of 21:58, 16 October 2026
(One intermediate revision by the same user not shown)
Line 30:		Line 30:

	* S1-6: Reset Enable. Factory Default: jumper installed. Connects Apple bus reset signal to CF device reset. I recommend leaving this jumper in.		* S1-6: Reset Enable. Factory Default: jumper installed. Connects Apple bus reset signal to CF device reset. I recommend leaving this jumper in.


			== Firmware Upgrade ==
			The firmware for the CFFA1 is user upgradeable, and is simple and easy to do. Please review the "CFFA1 Firmware 1.2 Release Notes" below to start with. Either of the CF Card images has the newest firmware on it, as well as the latest version of the Ultimate Apple1 User Image. Once you have restored the CF Card image you can load and run the firmware updater program. '''Be sure DIP Switch 4 is UP/ON so you can write to the ROM.''' If the switch is DOWN/OFF the ROM is write protected.


	== Downloadable Files ==		== Downloadable Files ==

Talk:CFFA1

RMHenry — Sat, 17 Oct 2026 04:48:08 GMT

Created page with "Please post your support questions here and ReActiveMicro or someone from the Community will be glad to assist you!"

New page

Please post your support questions here and ReActiveMicro or someone from the Community will be glad to assist you!

CFFA1

RMHenry — Sat, 17 Oct 2026 04:46:41 GMT

DIP Switch Settings

← Older revision		Revision as of 21:46, 16 October 2026
(2 intermediate revisions by the same user not shown)
Line 17:		Line 17:
	==DIP Switch Settings==		==DIP Switch Settings==
	The DIP Switch is located at the upper RIGHT corner of the card, and is designated "S1".<br>		The DIP Switch is located at the upper RIGHT corner of the card, and is designated "S1".<br>
	The default setting for the ~~switch~~ is: 1-OFF, 2-ON, 3-OFF, 4-6-ON.		'''The default setting for the Replica1 is: 1-OFF, 2-ON, 3-OFF, 4-6-ON.'''

	* S1-1: Unused. Can be in any position.		* S1-1: Unused. Can be in any position.
Line 30:		Line 30:

	* S1-6: Reset Enable. Factory Default: jumper installed. Connects Apple bus reset signal to CF device reset. I recommend leaving this jumper in.		* S1-6: Reset Enable. Factory Default: jumper installed. Connects Apple bus reset signal to CF device reset. I recommend leaving this jumper in.


	== Downloadable Files ==		== Downloadable Files ==
Line 39:		Line 38:
	File:PDF_ICON.svg\|CFFA1 Firmware 1.2 Release Notes\|link=https://wiki.reactivemicro.com/images/6/65/Release_Notes_v1.2.txt		File:PDF_ICON.svg\|CFFA1 Firmware 1.2 Release Notes\|link=https://wiki.reactivemicro.com/images/6/65/Release_Notes_v1.2.txt

	File:Floppy_Icon_312.svg\|128MB CF Card Image, Ultimate Apple1 User Image Plus v1.2 Firmware and Loader/Upgrader\|link=https://wiki.reactivemicro.com/images/d/d6/2026-10-11_-_CFFA1_128MB_-_UA1_User_Image.imgc		File:Floppy_Icon_312.svg\|128MB CF Card Image, Ultimate Apple1 v3.3 User Image Plus v1.2 Firmware and Loader/Upgrader\|link=https://wiki.reactivemicro.com/images/d/d6/2026-10-11_-_CFFA1_128MB_-_UA1_User_Image.imgc
			File:Floppy_Icon_312.svg\|32MB .PO Image, Ultimate Apple1 v3.3 User Image Plus v1.2 Firmware and Loader/Upgrader\|link=https://wiki.reactivemicro.com/images/7/7b/2026-10-11_-_CFFA1_-_CF_Distro_-_UA1_CFFA_v3.3.po
	</gallery>		</gallery>
	</div>		</div>

			The "128MB CF Card Image" (.IMGC) image uses [http://hddguru.com/software/HDD-Raw-Copy-Tool/ HDDRawCopy v1.10] to restore directly to a 128MB or large CF Card. The .PO image uses CiderPress and you might need to partition the CF Card first before restoring.

	[[Category:Hardware]]		[[Category:Hardware]]
	[[Category:Apple]]		[[Category:Apple]]

File:2026-10-11 - CFFA1 - CF Distro - UA1 CFFA v3.3.po

RMHenry — Sat, 17 Oct 2026 04:35:39 GMT

RMHenry uploaded File:2026-10-11 - CFFA1 - CF Distro - UA1 CFFA v3.3.po 2026-10-11: CFFA1, 128MB CF Card Image, Ultimate Apple1 v3.3 User Image Plus v1.2 Firmware and Loader/Upgrader. Use CiderPress to restore image.

New page

== Summary ==
2026-10-11: CFFA1, 128MB CF Card Image, Ultimate Apple1 v3.3 User Image Plus v1.2 Firmware and Loader/Upgrader.

Use CiderPress to restore image.

CFFA1

RMHenry — Sat, 17 Oct 2026 04:32:25 GMT

Downloadable Files

← Older revision		Revision as of 21:32, 16 October 2026
Line 39:		Line 39:
	File:PDF_ICON.svg\|CFFA1 Firmware 1.2 Release Notes\|link=https://wiki.reactivemicro.com/images/6/65/Release_Notes_v1.2.txt		File:PDF_ICON.svg\|CFFA1 Firmware 1.2 Release Notes\|link=https://wiki.reactivemicro.com/images/6/65/Release_Notes_v1.2.txt

	File:Floppy_Icon_312.svg\|~~Sound Check Program - v2~~\|link=https://wiki.reactivemicro.com/images/5/5b/~~4soniq_v2~~.po		File:Floppy_Icon_312.svg\|128MB CF Card Image, Ultimate Apple1 User Image Plus v1.2 Firmware and Loader/Upgrader\|link=https://wiki.reactivemicro.com/images/d/d6/2026-10-11_-_CFFA1_128MB_-_UA1_User_Image.imgc
	</gallery>		</gallery>
	</div>		</div>

File:2026-10-11 - CFFA1 128MB - UA1 User Image.imgc

RMHenry — Sat, 17 Oct 2026 04:30:52 GMT

RMHenry uploaded File:2026-10-11 - CFFA1 128MB - UA1 User Image.imgc 2026-10-11: CFFA1, 128MB CF Card Image, Ultimate Apple1 User Image Plus v1.2 Firmware and Loader/Upgrader. Use HDDRawCopy v1.10 Portable to restore image.

New page

== Summary ==
2026-10-11: CFFA1, 128MB CF Card Image, Ultimate Apple1 User Image Plus v1.2 Firmware and Loader/Upgrader.

Use HDDRawCopy v1.10 Portable to restore image.

CFFA1

RMHenry — Sat, 17 Oct 2026 03:18:47 GMT

Downloadable Files

← Older revision		Revision as of 20:18, 16 October 2026
(One intermediate revision by the same user not shown)
Line 30:		Line 30:

	* S1-6: Reset Enable. Factory Default: jumper installed. Connects Apple bus reset signal to CF device reset. I recommend leaving this jumper in.		* S1-6: Reset Enable. Factory Default: jumper installed. Connects Apple bus reset signal to CF device reset. I recommend leaving this jumper in.


			== Downloadable Files ==
			<div class="new_window">
			<gallery class="center" widths=150px heights=80>
			File:PDF_ICON.svg\|User Manual v1.1 for CFFA1 v1.0 RevD\|link=https://wiki.reactivemicro.com/images/0/0d/CFFA1_Manual_1.1.pdf
			File:PDF_ICON.svg\|Quick Start Instructions - 2023-02-27\|link=https://wiki.reactivemicro.com/images/9/9c/2023-11-13_-_CFFA1_-_Handout.pdf
			File:PDF_ICON.svg\|CFFA1 Firmware 1.2 Release Notes\|link=https://wiki.reactivemicro.com/images/6/65/Release_Notes_v1.2.txt

			File:Floppy_Icon_312.svg\|Sound Check Program - v2\|link=https://wiki.reactivemicro.com/images/5/5b/4soniq_v2.po
			</gallery>
			</div>

			[[Category:Hardware]]
			[[Category:Apple]]

File:Release Notes v1.2.txt

RMHenry — Sat, 17 Oct 2026 03:16:47 GMT

RMHenry uploaded File:Release Notes v1.2.txt CFFA1 v1.2 Firmware Release Notes

New page

== Summary ==
CFFA1 v1.2 Firmware Release Notes

File:2023-11-13 - CFFA1 - Handout.pdf

RMHenry — Sat, 17 Oct 2026 02:52:01 GMT

RMHenry uploaded File:2023-11-13 - CFFA1 - Handout.pdf Quick Start Instructions

New page

== Summary ==
Quick Start Instructions

File:CFFA1 Manual 1.1.pdf

RMHenry — Sat, 17 Oct 2026 02:48:08 GMT

RMHenry uploaded File:CFFA1 Manual 1.1.pdf Manual v1.1 for CFFA1 v1.0 RevD

New page

== Summary ==
Manual v1.1 for CFFA1 v1.0 RevD

Apple IIe Enhancement Kit

RMHenry — Sat, 17 Oct 2026 02:44:38 GMT

Video ROMs

← Older revision		Revision as of 19:44, 16 October 2026
(2 intermediate revisions by the same user not shown)
Line 88:		Line 88:
	File:Apple_IIe_Video_French_Canadian_-_Unenhanced_-_341-0168-A_-_2732.svg\|French Canadian - Unenhanced<br>[https://downloads.reactivemicro.com/Apple%20II%20Items/ROM_and_JEDEC/IIe/Video%20ROM/Apple%20IIe%20Video%20French%20Canadian%20-%20Unenhanced%20-%20341-0168-A%20-%202732.bin Apple PN: 341-0168-A]<br>24 Pin, 2732 Series ROM		File:Apple_IIe_Video_French_Canadian_-_Unenhanced_-_341-0168-A_-_2732.svg\|French Canadian - Unenhanced<br>[https://downloads.reactivemicro.com/Apple%20II%20Items/ROM_and_JEDEC/IIe/Video%20ROM/Apple%20IIe%20Video%20French%20Canadian%20-%20Unenhanced%20-%20341-0168-A%20-%202732.bin Apple PN: 341-0168-A]<br>24 Pin, 2732 Series ROM

	File:Apple_IIe_Video_French_Canadian_-_Enhanced_-_2732.svg\|French Canadian - Enhanced<br>[https://downloads.reactivemicro.com/Apple%20II%20Items/ROM_and_JEDEC/IIe/Video%20ROM/Apple%20IIe%20Video%20French%20Canadian%20-%20Enhanced%20-%202732.bin Apple PN: 341-0306-A]<br>24 Pin, 2732 Series ROM		File:Apple_IIe_Video_French_Canadian_-_Enhanced_-_2732.svg\|French Canadian - Enhanced<br>[https://downloads.reactivemicro.com/Apple%20II%20Items/ROM_and_JEDEC/IIe/Video%20ROM/Apple%20IIe%20Video%20French%20Canadian%20-%20Enhanced%20-%20341-0306-A%20-%202732.bin Apple PN: 341-0306-A]<br>24 Pin, 2732 Series ROM
	</gallery>		</gallery>

Apple Chip Designations

RMHenry — Sat, 17 Oct 2026 02:34:17 GMT

← Older revision		Revision as of 19:34, 16 October 2026
(One intermediate revision by the same user not shown)
Line 503:		Line 503:
	\|ROM 2kb*8		\|ROM 2kb*8
	\|Video ROM Italy/USA		\|Video ROM Italy/USA
			\|-
			\|341-0168-A
			\|IIc, IIe
			\|ROM 4kb*8
			\|Video ROM French Canadian - Enhanced
			\|-
			\|341-0306-A
			\|IIc, IIe
			\|ROM 4kb*8
			\|Video ROM French Canadian - Unenhanced
	\|-		\|-
	\|341-0170-A 342-0170-A		\|341-0170-A 342-0170-A

Apple IIe Enhancement Kit

RMHenry — Sat, 17 Oct 2026 02:21:05 GMT

Video ROMs

← Older revision		Revision as of 19:21, 16 October 2026
Line 88:		Line 88:
	File:Apple_IIe_Video_French_Canadian_-_Unenhanced_-_341-0168-A_-_2732.svg\|French Canadian - Unenhanced<br>[https://downloads.reactivemicro.com/Apple%20II%20Items/ROM_and_JEDEC/IIe/Video%20ROM/Apple%20IIe%20Video%20French%20Canadian%20-%20Unenhanced%20-%20341-0168-A%20-%202732.bin Apple PN: 341-0168-A]<br>24 Pin, 2732 Series ROM		File:Apple_IIe_Video_French_Canadian_-_Unenhanced_-_341-0168-A_-_2732.svg\|French Canadian - Unenhanced<br>[https://downloads.reactivemicro.com/Apple%20II%20Items/ROM_and_JEDEC/IIe/Video%20ROM/Apple%20IIe%20Video%20French%20Canadian%20-%20Unenhanced%20-%20341-0168-A%20-%202732.bin Apple PN: 341-0168-A]<br>24 Pin, 2732 Series ROM

	File:Apple_IIe_Video_French_Canadian_-_Enhanced_-_2732.svg\|French Canadian - Enhanced<br>[https://downloads.reactivemicro.com/Apple%20II%20Items/ROM_and_JEDEC/IIe/Video%20ROM/Apple%20IIe%20Video%20French%20Canadian%20-%20Enhanced%20-%202732.bin Apple PN: ~~None/Custom~~]<br>24 Pin, 2732 Series ROM		File:Apple_IIe_Video_French_Canadian_-_Enhanced_-_2732.svg\|French Canadian - Enhanced<br>[https://downloads.reactivemicro.com/Apple%20II%20Items/ROM_and_JEDEC/IIe/Video%20ROM/Apple%20IIe%20Video%20French%20Canadian%20-%20Enhanced%20-%202732.bin Apple PN: 341-0306-A]<br>24 Pin, 2732 Series ROM
	</gallery>		</gallery>

CFFA1

RMHenry — Fri, 16 Oct 2026 10:06:25 GMT

← Older revision		Revision as of 03:06, 16 October 2026
(One intermediate revision by the same user not shown)
Line 1:		Line 1:
	~~Test create~~ page.		[[Image:2026-CFFA1-Original-tiny.png\|thumb\|R&D Automation CFFA1\|link=https://wiki.reactivemicro.com/images/b/b3/2026-CFFA1-Original-tiny.png]]

			The CFFA1 is mass storage controller card for the Apple 1 and its clones. R&D Automation has designed the card to interface with the expansion slot on the Apple 1 motherboard. The CFFA1 allows access and storage of files on CF media via simple menu driven interface.


			<strong>Product Status:</strong> Actively sold by Manila Gear and ReActiveMicro.

			<strong>Support:</strong> Post on the [[{{TALKPAGENAME}}\|Discussion]] page (link above) or email [http://store.reactivemicro.com/contact-us/ ReActiveMicro Support].

			<strong>Sales:</strong> Visit the [http://store.reactivemicro.com/shop/ ReActiveMicro Store].


			== History ==
			The CFFA1 was created by R&D Automation and released for sale in March of 2007. On November 10, 2023 ReActiveMicro officially announced the addition of the CFFA1 to the RM Store.


			==DIP Switch Settings==
			The DIP Switch is located at the upper RIGHT corner of the card, and is designated "S1".<br>
			The default setting for the switch is: 1-OFF, 2-ON, 3-OFF, 4-6-ON.

			* S1-1: Unused. Can be in any position.

			* S1-2: Set switch to ON to disable response from the onboard SRAM in the address range of $1000 to $7FFF. This is useful if you are using a Replica1 computer, which already provides SRAM in this address range. Leaving this switch OFF on a Replica1 or any host system with RAM in this address range will result in a bus fight and unpredictable computer operation.

			* S1-3: Set switch to ON to set pin19 of the CPLD to a logic 0. This pin is currently unused. But may be used in future release of CPLD logic firmware.

			* S1-4: EEPROM Write Enable. When set to OFF, this switch prevents accidental and intentional writes to the EEPROM. Always leave this switch in the OFF position until you want to change the EEPROM contents.

			* S1-5: Set switch to ON to enable the 32KB SRAM. This SRAM is mapped into the host computer at $1000 to $8FFF. This cannot be changed without reprogramming the CPLD. You can however prevent the SRAM from responding to addresses $1000 to $7FFF using S1-2. This is useful if you are using a Replica1 computer. Note: the Menu firmware developed for the CFFA1 needs RAM to exist from addresses $8000 to $8FFF on the host computer. If your host computer already has this RAM then disable the CFFA1‟s onboard SRAM by switching this switch OFF.

			* S1-6: Reset Enable. Factory Default: jumper installed. Connects Apple bus reset signal to CF device reset. I recommend leaving this jumper in.

CFFA1

RMHenry — Fri, 16 Oct 2026 07:47:00 GMT

Created page with "Test create page."

New page

Test create page.

File:2026-CFFA1-Original-tiny.png

RMHenry — Fri, 16 Oct 2026 07:46:01 GMT

RMHenry uploaded File:2026-CFFA1-Original-tiny.png Original pic from Rich.

New page

== Summary ==
Original pic from Rich.

User talk:Rmadmin

RMHenry — Fri, 16 Oct 2026 07:27:22 GMT

RMHenry deleted page User talk:Rmadmin content was: "Test", and the only contributor was "RMHenry" (talk)

Main Page

RMHenry — Fri, 16 Oct 2026 06:58:39 GMT

← Older revision		Revision as of 23:58, 15 October 2026
(One intermediate revision by the same user not shown)
Line 6:		Line 6:
	[[Image:Main_page_DOWNLOADS.svg\|185px\|RM Downloads\|link=http://www.downloads.reactivemicro.com/]]		[[Image:Main_page_DOWNLOADS.svg\|185px\|RM Downloads\|link=http://www.downloads.reactivemicro.com/]]
	</center>		</center>

	<center><strong>ReActiveMicro supports the entire line of Apple II Personal Computers.<br>		<center><strong>ReActiveMicro supports the entire line of Apple II Personal Computers.<br>
	Subscribe to ReActiveMicro and know instantly about updates, news and information first hand sent to you by email.</strong>		Subscribe to ReActiveMicro and know instantly about updates, news and information first hand sent to you by email.</strong>
Line 35:		Line 35:
	File:Photoroom_20240316_143943.jpg\|A2FPGA Multicard\|link=A2FPGA		File:Photoroom_20240316_143943.jpg\|A2FPGA Multicard\|link=A2FPGA
	File:IMG_20201227_152312585_HDR-Wiki-tiny.png\|Universal Enclosure PSU Kit\|link=Universal_Enclosure_PSU		File:IMG_20201227_152312585_HDR-Wiki-tiny.png\|Universal Enclosure PSU Kit\|link=Universal_Enclosure_PSU
	~~File:IMG_20200914_165454128_HDR-Main-tiny.png\|12-inch LCD Display for Composite\|link=12-inch_LCD_Display~~
	</gallery>		</gallery>
	</div></div>		</div></div>
Line 56:		Line 55:

	<gallery class="center" widths=300px>		<gallery class="center" widths=300px>
			File:IMG_20200914_165454128_HDR-Main-tiny.png\|12-inch LCD Display for Composite\|link=12-inch_LCD_Display
	File:image1.jpg\|Disk II Light MOD\|link=Disk_II%2B		File:image1.jpg\|Disk II Light MOD\|link=Disk_II%2B

	File:IMG_20200914_165100448_HDR-cables-tiny.png\|Mini AV2HDMI Video Adapter\|link=Mini_AV2HDMI_Video_Adapter		File:IMG_20200914_165100448_HDR-cables-tiny.png\|Mini AV2HDMI Video Adapter\|link=Mini_AV2HDMI_Video_Adapter
	File:Apple_II_Plus_Rev7_Horizontal.png\|Apple II ''plus'' Rev 7 RFI<br>Factory NEW Replacement Mainboard\|link=Apple_II_Plus_Rev_7_RFI		File:Apple_II_Plus_Rev7_Horizontal.png\|Apple II ''plus'' Rev 7 RFI<br>Factory NEW Replacement Mainboard\|link=Apple_II_Plus_Rev_7_RFI